Concrete Cleaning – Concrete is a durable material for interior and exterior floors. It’s sturdy, easy-to-clean and fairly resistant to stains. Concrete flooring does stain, though. It’s porous and will soak up dirt, spills and harbor mildew. Tough as concrete is, it will need a periodic scrubbing. Here’s how to clean concrete, both indoors and out.
Concrete Cleaning with a power-washer
A power washer is the easiest way to clean concrete outdoors. You should be able to blast away dirt, mildew and grime in an afternoon. Rent one and read the instructions on how to use the machine before you start the project. Spray the patio surface with a detergent and use a stiff brush to scrub it into the concrete.
Never use a metal-bristle brush. Metallic fibers can get trapped in the porous surface of the concrete and rust. Put on safety goggles and gloves. Turn on the pressure washer. Move the wand from one side, using the same motion as you would if you were mopping a floor.
Concrete Cleaning with commercial solutions
Want to know how to remove stains from concrete?
There are several options. You can use bleach, ammonia and other commercial solutions (Note: never mix the two). For a natural solution to stubborn pigments on interior concrete floors. mix flour and hydrogen peroxide into a paste the consistency of peanut butter. Spread it over the stained area. Let sit overnight. Then, scrape with a plastic-edged scraper tool.
Trisodium phosphate (TSP) mixed with water and scrubbed onto the stained area with a nylon bristle brush can remove tough stains. Scrub till stain is gone and rinse with a hose. TSP is available at home improvement stores.
Muriatric acid can be used on outdoor floors to clean the toughest stains, like rust or dried grout. It’s a powerful, toxic material that should be used with extreme caution. Wear protective eyewear and gloves when using it and be sure to follow manufacturer instructions on how to clean concrete with muriatic acid.
For indoor concrete floors that are polished or stamped, you’ll need to take a gentler approach to how to clean concrete. You’ll just use a mop and a bucket of water mixed with a mild cleaner.
Don’t use ammonia, bleach or any highly acidic substance on polished or stamped floors. Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners. Mix a solution, apply to floor with a wet mop and then rinse with a mop dipped in clean water.
How to make your concrete floor resistant to stain?
To make your concrete floors resistant to future stains, apply a concrete sealant. Use a paint roller to apply it to clean, primed concrete. Start in the middle of the area and roll the sealant out to the edges.
Floors need to be resealed every two to three years. Knowing how to clean concrete properly will keep the floors in your garage, workshop and house looking good as new.
Concrete Cleaning Professional in Sydney
From high-pressure cleaning for oil stains and chewing gum to an entire clean of your building’s facade that will make your business shine, Enviro Clean and Capture can handle it all. Our commercial cleaning services cover tile cleaning and natural stone cleaning, glass coating and restoration, plus concrete cleaning that will maintain your businesses and properties to the highest standards.